»

Step1-How To Install Kloxo On A VPS Tutorial

How To Install VPS | Kloxo panel | Centos OS

I’ll guide you of how to setup a blank VPS hosting for an unmanaged virtual private server.

In this tutorial – Setup a VPS Linux Distribution – I’ll walk you through those basic steps, based on CentOS os, configuring some options and illustrating a typical unmanaged VPS through Kloxo panel.
Before we start, let’s scan go through 2 packages of VPS host specification as shown below. If you do not have one, you can check our VPS hosting plans by following – Click this page.
<<<< This Tutorial divided in 2 parts- Manual Installation And Auto Installation with Kloxo-panel >>>>
Available OSes:
CentOS 5 (32 & 64 Bit)
Debian 4 (32 & 64 Bit)
Debian 5 (32 & 64 Bit)
Debian 6 (32 & 64 Bit)
Fedora 14 (32 & 64 Bit)
Suse 11.3 (32 & 64 Bit)
Suse 11.4 (32 & 64 Bit)
Ubuntu 10.4 (32 & 64 Bit)
Ubuntu 11 (32 & 64 Bit)
Gentoo (Experimental)
Custom Control Panel Setup: We offer kloxo with customized options so that it uses just 16 MB of RAM including MYSQL support. You can host blogs, forums and other websites for a quarter of the cost of a normal web host, but have full control over every aspect of your system.
FAQ:
Q: Do you offer TUN/TAP, PPP or VPN on your servers?
A: Yes. Simply request that TUN/TAP and PPP be activated on your VPS.
Q: Do you allow proxies on your VPS?
A: Yes we do.
Q: What is your uptime like?
A: We offer a 99.99% uptime guarantee on our VPS servers (with the exception of downtime you cause or scheduled maintenance). Anything bellow that falls under our SLA (meaning you get credit based on how long its down).
Q: I need a control panel installed for me… do you guys offer that?
A: Our services are unmanaged. Which means we don’t typically help you with setting up or maintaining your VPS… Most of the time we’ll point you in the right direction if you need help, but in reality Google is your best friend.
Q: Your site shows that you offer VPS in 3 locations, but the location I want is out of stock… When will you have stock again?
A: Stock is issued as we purchase additional hardware and get new IPs. We also remove unpaid accounts on a daily basis. If you would like to be notified when we have stock at a specific location open a ticket with us and we’ll keep an eye out for you.
Q: What is your refund policy?
A: We offer 30 day refunds assuming that your account hasn’t abused our servers.
Q: Do you offer custom plans?
A: Yes we do, simply open a ticket and we’ll quote you our best offer.

VPS Sign upGet one today !


You’ll also learn how to configure your own Nameservers or hosts in order to use VPS.

I will also show you which few of the Top WP plugins that a shared hosting hate too much until they suspend your account.
Thank you for visiting this site. I will give you steps by steps to go for it. Your co-operation and patient are much needed in helping this tutorial.

 

(1) Manual Installation

If you have a Centos VPS you could use Kloxo or if your on a Debian VPS you could use OpenPanel.

In this tutorial – I will go for Kloxo Panel + CentOS System.

How to order A VPS? See the images below.

 

 

You can use auto password generator.

Wait for email message – Few hours or instant.

Your account has been Setup by admin

 

Namecheap.com - Cheap domain name registration, renewal and transfers - Free SSL Certificates - Web Hosting Namecheap.com - Cheap domain name registration, renewal and transfers - Free SSL Certificates - Web HostingNamecheap Domain Registration

Godaddy Domain Registration

Special Offer! .CO.UK domains just £2.69 from GoDaddy.com!

STEP 2:

Setup your nameserver at domain registrar

Video – Godaddy Nameserver

Step 3 Host Name Registration:

At Godaddy: To Register Your Own Domain Hosts / Nameservers

Your own nameservers

  1. Log in to your Account Manager.
  2. Next to Domains, click Launch.
  3. Click the domain name you want to use to register as your own nameserver.
  4. In the Host Summary section, on bottom left, click add.
  5. In Host name, enter the host name you want to register.

NOTE: The value entered here will be appended to your domain name to create the host name.

Point your IP address to your host name server. Assume IP address is 69.82.89.201 for illustration purposes only.

Do not use the ‘www’ prefix. Example: For the domain name yourdomain.com, entering ‘ns1’

Here results in ns1.yourdomain.com.

6. In the Host IP fields, enter the IP addresses you want to add to the host. You might use the same IP for twice. That is, assign to NS.1 and NS.2.

NOTE: If Nameservers cannot share an IP address; therefore two unique IP addresses are required.

For E.g IP address is 69.82.89.201.

7. Click OK.

Creating the second Nameserver

8. You will need to create at least 2 nameservers. To create a second nameserver, repeat

step 5 & 6. Common practice dictates that the second nameserver will be named “ns2” or

“dns2”. For example, ns2.yourdomain.com or dns2.yourdomain.com.

9. Logiclly, the last part of the ip address of the second nameserver will be incremented by 1.

For example, 69.82.89.202.

Therefore, 2 unique IP Addresses are:

  1. 69.82.89.201.
  2. 69.82.89.202.
For NameCheap:
Point your domain to your VPS host on Namecheap

Next, to Register Nameserver on Name Cheap – hostname

Step 4: Now, time to install Kloxo panel manually.

First things first, refer to Kloxo Installation guide. This is at least you are confident at what you are doing.

Download Putty and watch this Putty video of how to use it.

However, for a newbie, you need to learn how to operate a command basic. The site for your to learn is at http://www.tutorialspoint.com/unix/unix-vi-editor.htm

Tips: Famous commands you should know are:

  1. # cd
  2. # control x
  3. # exit
  4. # reboot
  5. # control z to stop
  6. When you were on Putty, type root and enter, hightlight and copy your root password , then right click on the cursor and enter. You are good to go.
You have to disable SELinux by editing /etc/sysconfig/selinux and changing the line to selinux=disabled. This will keep
SELinux from being enabled on your server next boot.
Then you must run the following command as root to disable SELinux for the current session:
RUN – Command
Code: No need paste this #
# su – root
RUN – Command
Code:
# setenforce 0
If you are unsure this procedure worked, you can run /usr/sbin/sestatus to check its status. Failure to correctly disable
SELinux will render your Kloxo install useless and an OS reload may be required to properly reinstall it.

Then, run command:

# yum install -y wget
# yum update
Command execution: To Prevent the following error when the installation failed because of the following error:
Error: Missing Dependency: kernel-headers is needed by package glibc-headers-2.5-81.el5_8.4.x86_64 (updates)
kernel-headers
Please do the following command, “yum -y install kernel-devel kernel-headers”
This will install the required Kernel Headers dependency for you, If all else fails do a “–skip-broken” at the end of the
command to see if it can bypass it.
You could try running: package-cleanup –problems
package-cleanup –dupes
rpm -Va –nofiles –nodigest
Select your CentOS OS The first time you install. It can be Centos 5 , Centos 5.2, Centos 5.5, Centos 5.7 and so on [ No listed here, Search main site , visit http://vault.centos.org ].
Run command:
  1. wget http://mirror.centos.org/centos/5/updates/i386/RPMS/glibc-devel-2.5-81.el5_8.2.i386.rpm
  2. wget http://vault.centos.org/5.2/os/x86_64/CentOS/kernel-headers-2.6.18-92.el5.x86_64.rpm
  3. wget http://vault.centos.org/5.7/os/x86_64/CentOS/kernel-headers-2.6.18-274.el5.x86_64.rpm
  4. wget http://vault.centos.org/5.5/os/x86_64/CentOS/kernel-headers-2.6.18-194.el5.x86_64.rpm
Extract command:
  1. rpm -i kernel-headers-2.6.18-92.el5.x86_64.rpm
  2. rpm -ivh kernel-headers-2.6.18-194.el5.x86_64.rpm
  3. rpm -ivh kernel-headers-2.6.18-274.el5.x86_64.rpm

Still unable to remove the stubborn error? No problem.

Your system is probably configured to exclude the kernel packages.

Try:
sudo vi /etc/yum.conf
then comment (or remove the ‘ kernel* ‘ part):
^^ exclude=kernel*
Then you should be able to run command:
#sudo yum install kernel-headers

Installing Kloxo

Kloxo installation consists of downloading kloxo-installer.sh from download.lxcenter.org and executing it as root. The script
will ask for a password (enter your root password).
Run Command
Code:
# wget http://download.lxcenter.org/download/kloxo/production/kloxo-installer.sh
After download complete Run this code to install the script
Code:
# sh ./kloxo-installer.sh – -type=master
Once kloxo is installed, you can connect to Server Access Page
  • Secure Login [ https://yourIPaddress:7777/ ] OR
  • Standard Login [ http://yourIPaddress:7778/ ]
and you will be presented with a login screen.
Login as admin with password admin and once you are in, Kloxo will ask you to change the default password to a secure one.
That’s complete the installation of Kloxo panel.

 

** You might consider to install Spamassassin**
Login to your putty and type command:
# yum install spamassassin
Image 1:
Image 2:
image 3:

Install Kloxo On HyperVM Control Panel

how to install vps, Hypervm, install wordpress, install wordpress on vps, installing wordpress, OpenVZ,

 

free counters

 

2 comments

2 pings

  1. ssd vps hosting says:

    Wow, extraordinary website construction! The way lengthy are you currently blogging and site-building pertaining to? you’ve made blogging start looking effortless. The complete search of the web site is excellent, much less this article substance!

  2. Vps Servers says:

    Hey There. I found your blog using msn. That is a really well written article. I’ll be sure to bookmark it and return to learn extra of your useful info. Thanks for the post. I’ll certainly comeback.

  1. Setup WordPress On Your Domain says:

    […] Step 1 […]

Leave a Reply

Follow

Get every new post delivered to your Inbox

Join other followers